CNJ-380 Animal Reader

Category:

Reader/writer


Introduction This is a low frequency tag scanner that adopt wireless identification technology and it suppors reading FDX-A, FDX-B,HDX(ISO11784/85) etc. tag. This scanner use high brightness OLED display which can be seen clearly in bright light environment. It can store max 20000 records of tag information with its built-in memory, users can upload the information to the computer through USB cable . This product is stable with simple operation which is widely used for little animal management, resource management, railway inspection etc..

Detailed introduction


  1. Introduction

This is a low frequency tag scanner that adopt wireless identification technology and it suppors reading FDX-A, FDX-B,HDX(ISO11784/85) etc. tag.

This scanner use high brightness OLED display which can be seen clearly in bright light environment. It can store max 20000 records of tag information with its built-in memory, users can upload the information to the computer through USB cable .

This product is stable with simple operation which is widely used for little animal management, resource management, railway inspection etc..

  1. Parameter

Working Frequency

134.2KHz

Support Tag

FDX-B、FDX-A 、HDX (ISO11784/85)

Reading range

FDX-B:

2*12mm tube tag>8cm

30mmr ear tag>19cm(depends on reading condition and device)

FDX-A:2*12mmtube tag>8cm

HDX:

2*12mmtube tag>8cm

30mmear tag>15cm(depends on reading condition and device)

Standard

ISO11784/85

Reading time

<100ms

Prompt

128*64 high brightness OLED、Buzzer

Power supply

Li-battery

Consumption

0.4W

Storage capacity

20000 records(UID+Time)

Battery life

>50000 times if full of electricity

Interface

USB2.0, bluetooth

Weight

350g

Device dimension

L:22.5cm W:11cm H:3.2cm

Packing dimension

L:26.5cm W:15.5cm H:5.2cm

Language

Chinese Russian,Japanese,English

Working Temp

-10℃~50℃

Storage Temp

-30℃~70℃

  1. Function and operating

3.1 Display window

The device with a 128*64 high brightness OLED display which can display tag info, time communication mode,storage mode ect.

 

1副本

3.2 Basical operating

      • Turn on the device

Press“SCAN”for 2s when device is on off statu,device will be on and to main interface.

      • Scan tag

Press"Scan"on main interface,when display"scaning…"it can scan the tag. Buzzer willbeepone time when a tag is scanned, and display the tag info.If no tag in 10s, buzzer will beep and display “no tag”.

      • Data viewing

Press‘<’ and ‘>’ to check the tag information and time on main interface.

      • Automatic shutdown

In the power on state, there is no operation or data transmission within 30s, and the system will automatically shut down and enter the sleep state.

3.3 System setting.

Press and hold the "scan" button in the power on state, the reader will enter the setting mode, and the display interface is as shown in the figure below. Press the left and right buttons ('< key and' > 'key) to move the "arrow" cursor to select different functions for setting.

key word:

tag device display

Online
Message


With excellent quality and professional service, Jiaqirui products have won praise from users in various industries at home and abroad. The products are exported to more than 30 countries and regions around the world, and are highly praised by customers!

Submit