CNJ-180 animal reader
Category:
Reader/writer
Detailed introduction
- Introduction
This is a low frequency tag scanner that adopt wireless identification technology and it suppors reading EMID, FDX-B(ISO11784/85) etc. tag.
This scanner use high brightness OLED display which can be seen clearly in bright light environment. It can store max 128 records of tag information with its built-in memory, users can upload the information to the computer through USB cable .
This product is stable with simple operation which is widely used for little animal management, resource management, railway inspection etc..

Table 1 Parameter
|
Working Frequency |
134.2Khz/125Khz |
|
Support Tag |
EMID,FDX-B(ISO11784/85) |
|
Reading/writing range |
2*12mm glass tube tag>5cm 30mm ear tag>15cm(depends on tag) |
|
Standard |
ISO11784/85 |
|
Reading time |
<100ms |
|
Prompt |
0.91inch high brightness OLED,buzzer |
|
Power supply |
3.7V(Li-battery) |
|
Memory |
128 records |
|
Communication |
USB2.0 |
|
Language |
English or customized |
|
Working Temp |
-10℃~50℃ |
|
Storage Temp |
-30℃~70℃ |
|
|
- Operation:
- Turn on the device and scanning.
Press scan button to turn on the device and on scanning model
- The tag NO. will be displayed on screen if detect a tag,display “no tag find” if no tag is detected.
- Device could be charged and uploaded data by USB cable.
When device is connected by USB,”USB”will be displayed at top left corner,and on charging status for battery status.
Press scann button for 3s,data will be uploaded from the scanner,MAX 128 records.
After uploading successfully,display as below
The data can be upload in real time if scanner is connected by USB cable when reading a tag.
4.Scanner will be off after 120s without working.
key word:
Product manual download
Online
Message
With excellent quality and professional service, Jiaqirui products have won praise from users in various industries at home and abroad. The products are exported to more than 30 countries and regions around the world, and are highly praised by customers!